Asme U Stamp Tube Bundle For Air Cold Heat Exchanger Heat Transfer Recovery System For Oil Refining Projects

There are two different of tube bundles: Straight tubes and U tubes. Depending on specific requirement and application, there are following tube material options:

Carbon Steel Tube : ASTM A179/ASME SA179/179M, ASTM A192, ASTM A333, ASTM A334
Alloy Steel Tubes: ASTM A213 T5, T9, T11, T22, T91
Copper Tubes

Tank Shell Materia Options:

ASTM A516 GR70
ASTM A572 GR50
ASTM A537 CL1

Straight Tube bundle VS U Tube Bundle

Stright tube bundle: The first and previously common use tube bundle is configured with straight tube. As the layout both ends in open status, the hot liquid is pumped through the bundle in a straight line from one end of the tank shell to another end of tank shell. This type is efficient, but it requires more effort to open the tank shall to remove the bundle to do cleanning or maintainace. Straight tube bundle has a lower installation cost than U tube bundle.

U Tube Bundle: The recommend and new common use tube bundle is the U tube layout. This bundle impressive features is entry and exit points on the same side of the shell on a tube shell cap divided into two sealed chambers. The tubes manufactured in U shape, which it leaves the entry chamber and travel to the opposite end of the shell and return in the opposite direction to the exit chamber. This type of layout is easier to disassemble for maintenance with the bundle typically being slid out as a modular unit. U type tube bundle also suited good with high temperature differences, relieve most thermal expansion and reduce contraction stresses in the

bundle.

Applications:

Chemical Production
Petroleum Industry
Energy Power
Pharmaceutical